Auburns other Blog

Cool Useful stuff to build!

Posted by: birdofpray, 11:00 PM GMT on May 05, 2011

I decided this might be a good topic...I wish I had the bucks for some of these...I might have to improvise as always...LOL

New from Struck-Kit® Introducing...

The first & only... AMPHIBIOUS OFF-ROAD TRUCK you "home-build" from a KIT!

There’s nothing like the MINI-BEEP! It’s uniquely different and better than any ATV, any UTV, any other kind of off-road vehicle.

Permalink | A A A

Top of Page

Reader Comments

Display: 0, 50, 100, 200

Sort: Newest First - Order Posted

Viewing: 1 - 12

Page: 1 — Blog Index

1. Skyepony (Mod) 11:09 PM GMT on May 05, 2011
Dragonfly says he'll be building one of those when he's bigger. Member Since: August 10, 2005 Posts: 144 Comments: 29240

2. birdofpray 11:13 PM GMT on May 05, 2011
Quoting Skyepony: Dragonfly says he'll be building one of those when he's bigger. Is that not too cool? Member Since: August 28, 2006 Posts: 131 Comments: 1022

3. birdofpray 11:14 PM GMT on May 05, 2011
PlyWood!!! Member Since: August 28, 2006 Posts: 131 Comments: 1022

4. mobal 12:33 AM GMT on May 06, 2011
This will be a fun blog! Member Since: August 3, 2005 Posts: 479 Comments: 5309

5. mobal 12:39 AM GMT on May 06, 2011
Dont forget your material Member Since: August 3, 2005 Posts: 479 Comments: 5309

6. mobal 12:59 AM GMT on May 06, 2011
Here is one that I am working on to run lights on a Jon boat to flounder with. I have a few old engines that need carb. work that I obtained for free. Alternator not an issue for me. Generator Member Since: August 3, 2005 Posts: 479 Comments: 5309

7. auburn (Mod) 4:16 PM GMT on May 06, 2011
Quoting mobal: Here is one that I am working on to run lights on a Jon boat to flounder with. I have a few old engines that need carb. work that I obtained for free. Alternator not an issue for me. Generator You can also build a welder like this! Member Since: August 27, 2006 Posts: 538 Comments: 46633

8. auburn (Mod) 4:25 PM GMT on May 06, 2011
Onboard welder using a GM Delco 140 Amp alternator Member Since: August 27, 2006 Posts: 538 Comments: 46633

9. seflagamma 8:36 PM GMT on May 06, 2011
Aubie, I want one of those! Member Since: August 29, 2005 Posts: 286 Comments: 40483

10. auburn (Mod) 9:50 PM GMT on May 06, 2011
Quoting seflagamma: Aubie, I want one of those! Yea me too...I think its really cool! Member Since: August 27, 2006 Posts: 538 Comments: 46633

11. mobal 1:21 AM GMT on May 07, 2011
Quoting auburn: You can also build a welder like this! Funny you say that. I also have an 18 horse mower engine that I thought about making a welder from. I would not use the Delco CS144 as the article refers to. It has diodes that avalanche at around 36 Volts. Also the regulator package is made for spec apps. This was covered in the post though. I plan on using a Leece Neville 2800JB. Its rated at 160 amps. With a stator change I can get 250 amps at 3200 RPM rotor speed. It has many more options on diodes, and I can change them myself, and I have already made a reostat that can control Voltage for this type of unit. What ever you all do. DO NOT install this type of welder on a vehicle made with a PCM, BCM etc., transient V's will fry them! Member Since: August 3, 2005 Posts: 479 Comments: 5309

12. KEEPEROFTHEGATE (Mod) 1:42 AM GMT on May 07, 2011
Member Since: July 15, 2006 Posts: 143 Comments: 40375

Viewing: 1 - 12

Page: 1 — Blog Index

Top of Page

New Comment

Community Standards Policy Comments will take a few seconds to appear.

Post Your Comments

Please sign in to post comments.

or Join

Not only will you be able to leave comments on this blog, but you'll also have the ability to upload and share your photos in our Wunder Photos section.

About birdofpray